100L Extrusion Blow Molding Machine with 180kN Clamping Force

Large containers punish weak clamping. Above 50 litres internal pressure during blow-up pushes hard against the mould parting line, and any deflection shows up as flash that has to be trimmed by hand and a wall that is thinner on one side. The MP100FD answers that with 180 kN of clamping force spread over an 800 x 600 mm platen. The machine is built around an 80 mm nitrided screw running at 25:1 L/D, which gives 120 to 150 kg/h of HDPE throughput, enough to feed a 100 litre